SEAON ALUMINIUM FOIL TAPE
Product Description:
SEAON Aluminum foil tape consists of an aluminum foil backing, combined with a high performance adhesive and protected by release paper liner adhering to ASTM Standards.
Advantages:
- Aluminum backing gives excellent reflection of both heat and light.
- The adhesive gives a very high initial tack and a good bonding for insulation applications.
- Suitable for masking in electroplating of aluminum because its non-contamination properties.
Applications:
- Cladding parts of an air conditioning ducting system.
- Roofing applications like flashing, joints and insulations.
- Sealing and joining ducts which provide an excellent vapor barrier in refrigeration applications.
- General purpose holding, patching, sealing for indoor applications. <
SEAON REINFORCED ALUMINIUM FOIL TAPE
Product Description:
SEAON Aluminum Foil/Scrim/PE Facing Tape consists of a composite aluminum foil, scrim, PE facing. This backing is combined with a lasting pressure sensitive hot melt adhesive that performs well under a wide range of temperatures surface, protected by an easy acrylic release silicone release paper, adhering to ASTM standards.
Advantages:
- Reinforced Aluminum Foil Tape meets the demands of a wide variety of applications.
- Pressure sensitive acrylic adhesive performs extremely well under a wide range of temperatures & on Surface.
- Protecting with Vapor seal Hot melt on reinforced aluminum foil faced fiberglass thermal insulation.
- Easy to install on site without special tools or application methods.
- Scrim contributes to a high tensile performance laminate. Hot melt adhesive which provides a wide application temperature range.
Applications:
- Rockwool & fiberglass, XLPE thermal insulation.
- Construction, applications.
- Roofing application like flashing, joints and insulations.
SEAON FSK TAPE
Product Description:
SEAON FSK Tape is a combination of Aluminum Foil, Scrim & Kraft Paper coated having high performance adhesive and protected by an easy release silicone paper liner
SEAON FSK Tape is available in three types: Rubber based and Solvent-based, hot melt.
Advantages:
- SEAON FSK tape backing provides a strong reinforcement and an excellent reflection of heat and light.
- Adhesive offers good service life in outdoor as well as high humidity atmosphere.
- Suitable for masking in electroplating aluminum due to its non-contamination properties.
- SEAON adhesive gives strong adhesion and holding power that provides a reliable and durable joint & seam sealing applications.
Applications:
- Joining foil faced rock wool,& XLPE, Pre Insulated duct insulation.
- Laminating parts of an air conditioning ducting system.
- Roofing applications like flashing, joints and insulations.
- Sealing and joining ducts which provide an excellent vapor barrier in refrigeration.
SEAON ALU GLASS TAPE
Product Description:
SEAON Alu glass Tape is a high tensile strength, aluminum glass fiber cloth backing (aluminum foil +
Glass fiber cloth reinforcement), combined with a high performance adhesive and laminated by an easy release silicone paper liner for specialized HVAC Ducting applications.
Advantages:
- SEAON Aluminum glass fiber cloth backing provides a strong reinforcement and an reflection of heat and light.
- Low moisture content of this tape makes it a good sealant.
- Adhesive offers long service life for outdoors well as high humidity atmosphere.
- It provides an excellent vapor barrier due to low moisture vapor transmission rate.
- The adhesive gives strong adhesion and holding power that provides a reliable and durable joint and seam sealing in insulation applications.
Applications:
- Closing foil-faced fiber glass & XLPE, Pre Insulated Duct insulation.
- Sealing aluminum-faced fiber glass duct boards.
- Roofing applications like flashing, joints and insulations.
- Sealing and joining ducts which provide an excellent vapor barrier in refrigeration applications.
SEAON ALU PET TAPE
Product Description:
SEAON Alu pet Tape is a Manufactured as a specialize special aluminum foil tape with PET film backing combined with strong solvent acrylic adhesives with easy release liner. It is recommended as a sealing tape for insulation.
Advantages:
- SEAON Aluminum foil + pet laminate backing gives excellent reflection of both heat and light. It also provides greater and improved tear strength to the backing.
- It conforms well to irregular surface insulation due to its flexibility.
- Solvent-based acrylic adhesive offers good initial tack and a permanent bonding for insulation applications.
- Suitable for masking in electroplating of aluminum due to its non-contamination properties.
Applications:
- Recommended as a sealing tape for XLPE, Pre Insulated Duct insulation.
- For laminating parts of an air conditioning ducting system.
- For roofing applications like flashing, joints and insulations.
- Used for sealing and joining ducts this provides an excellent vapor barrier as & refrigeration applications.
- For general purpose holding, patching, sealing for indoor applications.
SEAON GASKET FOAM TAPE
Product Description:
SEAON Gasket Foam Tape has a strong hot melt adhesive which is laminated with a white silicone release paper liner. The tape has good insulation properties and hence mainly used for thermal insulation applications.
Advantages:
- SEAON gasket foam tape as high bonding strength to all insulation foam surfaces.
- Flexible while providing strong adhesion at joints even on angular surfaces. Hence, suitable for lap joints, face-to-face joints and corner joints.
- Available in different widths to effectively cover the joints edges.
- Excellent in preventing condensation.
Applications:
- Gasket foam Tape is ideal for insulating hot or cold piping and fittings.
- Recommended for insulation purposes due to its high flexibility and conformability.
- HVAC industry for joining and sealing.
SEAON NBR (Nitrile Rubber) TAPE
Product Description:
SEAON NBR (Nitrile Rubber) Tape is flexible closed-cell NBR coated with a medium strength adhesive and laminated to a release paper liner. The tape has excellent flexibility which is suitable for thermal insulation.
Advantages:
- Good flexibility & conformability to a wide variety of surfaces.
- Provides a good service temperature range.
- Adheres well to a variety of surfaces.
Applications:
- High bonding strength to various insulation foam surfaces.
- Flexible while providing strong adhesion at joints.
- Supplied with stiff release paper liner for ease of removal, thus saving application time.
- Provides a very good services temperature range.
- Adheres well to a variety of surfaces.
SEAON UV BARRIER BLACK TAPE
Product Description:
SEAON UV Barrier black tape is made of U.V coated Fabric with one adhesive side. It is has a low mass to air ratio,
which effectively blocks the Ultra violet rays transfer. The upper surface of the UV Coated fabric blocks 96% to 99% Ultra violet rays. It is best in class shall be in the manner to provide an air tight cladding for its effective utilization.
‘SEAON UV Barrier black tape’ is best in class. Flexible, easy to fabricate and install, low cost and long lasting performance.
Advantages:
- High performance adhesive with very high initial and final adhesion, and high aging resistance.
- Excellent for interior and exterior duct insulation.
- Can also be applied to rectangular round, pipes (straight runs, bends, intersections).
- Moisture resistant & Moisture tight seams tape.
- UV-resistant, &flexible.
- Protection to the existing seam bonding.
- Easy to install & Cost effective.
Applications:
- Closing foil-faced fiber glass, & Nitrile, XLPE insulation.
- Sealing aluminum-faced fiber glass duct boards.
- Roofing applications like flashing, joints and insulations.
- Sealing and joining ducts which provide an excellent vapor barrier in refrigeration applications.
SEAON GC CLOTH BLACK TAPE
Product Description:
SEAON GC Cloth black tape is a high quality pressure sensitive thermal insulation joining tape with a glass cloth face. The backing is a high performance hot melt acrylic adhesive, with an easy to remove silicone liner.
Advantages:
- The aggressive hot melt acrylic adhesives offer for long serviceable life in outdoor as well as high humid conditions.
- Aluminum-Glass cloth backing provides excellent reflection of both heat and light.
- Low moisture content of these products makes these tapes as a good sealant.
Applications:
- Duct board joint and seams; Joining and sealing industrial pipe insulation.
- Duct sealing and joining for refrigerator and excellent barrier to vapor.
- Lamination for air conditioning ducting systems.
- Roofing applications like flashing, joints and insulations.